exisiting 3 switch wiring correction

[imported_Danny]

My bathroom has three switches. Over head there is an exhaust fan,heater,light combo unit. There is also a vanity light seperate. Previously the fan and heater both ran at the same time. <- (useless) also the 2 lights were switched together leaving one switch doing nothing. The power comes in at the switches. My question is this: How do you wire from one power source the heater w/seperate switch, the exhaust fan and over head light w/ seperate switch, and finaly the vanity light on the other switch? There is already three switches exsisting at the wall w/ the power source there also. The extra light only wires to the over head. Please if anyone can help , feel free to e-mail me or Im or any way possible. I have been without a light for a week now!!! Please help

[Wgoodrich]

We really don't want to give answers by email. If we email you then only you can benefit from that knowledge or advice provided. If we keep the discussion on the forum then we can help many who have similar or exactly the question that you have. Our goal of providing our forum is to help as many as possible with everytime we proved a reply. Goal is to help many at one time.

Try the following rough drawing and see if that helps you.

Let us know if this hits what you have.

Good Luck

Wg