Self Help Forums

Go Back   Self Help Forums > Repair > Plumbing - Existing Home
Register FAQ Members List Calendar Today's Posts

Plumbing - Existing Home Plumbing repair / Remodeling Ideas and Problem Solving Solutions

Reply
 
Thread Tools Display Modes
  #1   IP: 209.139.108.237
Old October 19th, 2002, 04:22 PM
sluciani sluciani is offline
Junior Member
 
Join Date: Sep 2002
Location: Long Island , N.Y.
Posts: 12
Default New Bathroom

Am installing new bathroom in new house extension. I'm finding it very difficult to get good advice. What I really need is a good diagram of a basic full bath, showing generally what goes where. At that point I can ask the local building inspector about local codes. I just need to sound like I have a clue.
Interestingly, in my township , home owners can do their own electrical work, but not plumbing.
So I guess you can burn the house down, but not flood it.
I've also noticed that plumbers are much more secretive than electricians--- around here anyway.
Reply With Quote
  #2   IP: 148.78.248.10
Old October 20th, 2002, 08:08 AM
Wgoodrich's Avatar
Wgoodrich Wgoodrich is offline
Super Moderator

 
Join Date: Sep 2002
Posts: 7,383
Default

A lot of the plumbing depends on relative location of the outlets in the bathroom and arrangment relating to each other geographically.

There is no such thing as a typical bathroom. Each is designed with what you have to deal with concerning placement and distance from each other concerning plumbing outlets.

Then you have attic above, second floor above. Then you have cement floor or crawl space. All affects the plumbing design.

Minimum sizes of plumbing are 1 1/4" vanity drain, 2" shower drain, 3" commode drain.

You must have a vent to release suction from that drainind water that would suck you traps dry.

Suggested common is to install a 4" soil pipe with a directed tee sized to 2" going to your vanity with your a tee installed in the wall so you vent will go up the vanity wall reducing to a 1 1/4" drain into your vanity. Then a second tee 2" from the soil pipe to go to your shower.

You must install a trap in the vanity drain and a trap below you shower drain. Water remains in your toilet with the trap built into the toilet thus no plumbing trap is required for you toilet.

When you go through the roof with your vent you must enlarge passing through the roof to 3" for frost guard.

Hope this helps

Wg
Reply With Quote
Reply






Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Service panel in bathroom (garage) *guest Electrical Code - USA 7 May 30th, 2009 09:10 AM
GFCI and Warm Tile installation in bathroom GSX4 Electrical Code - USA 1 January 3rd, 2006 06:44 PM
Basement Bathroom *Peter K Electrical - Existing Home 0 December 14th, 2003 09:30 AM
replacing old bathroom light with outlet attached to it *guest Electrical - Existing Home 1 December 12th, 2003 11:04 AM
installing new bathroom fan - foul up ebbakke Electrical - Existing Home 6 October 8th, 2002 11:04 AM


All times are GMT -4. The time now is 03:35 PM.


Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
(c) 2010 Self Help and More 'All Rights Reserved'
http://www.selfhelpforums.com