Self Help Forums

Go Back   Self Help Forums > Repair > Appliance Repair
Register FAQ Members List Calendar Today's Posts

Thread Tools Display Modes
  #1   IP:
Old February 21st, 2012, 09:50 AM
rkeens rkeens is offline
Junior Member
Join Date: Feb 2005
Posts: 2
Default Kenmore Washer 110 C26932692 Rinse Cycles

Have washer that always goes into 2nd rinse cycle even when selected for 1 rinse. Have checked accross rinse selector switch and when in 1 rinse position the circuit is open (no wires associated with this position) and when in 2 rinse position the circuit through the switch is made (2 wires associated with this position). Would this be a problem internal to the timer or could something be done connection wise to completely disable the 2 rinse option that we never use?
Reply With Quote
  #2   IP:
Old February 21st, 2012, 05:35 PM
jeff1's Avatar
jeff1 jeff1 is offline
Super Moderator

Join Date: Dec 2002
Posts: 5,086


110 C26932692
Canadian models for the most part ( esp dept store brands ) are not online.

Have washer that always goes into 2nd rinse cycle even when selected for 1 rinse
If the switch is ok, inpsect the wires to and from the switch to make sure none are pinched/melted/shorted....the switch is suppose to bypass the off in the timer so the timer can advance through the off to the second rince. If all else is ok then yes the timer itself would be suspect.

Appliance Repair Aid
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 09:17 AM.

Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
© QuinStreet, Inc. All Rights Reserved.