dcsimg
Results 1 to 3 of 3

Thread: Maytag wont fill at all

  1. #1
    Join Date
    Sep 2002
    Posts
    1,999

    Default Maytag wont fill at all

    My maytag washer will not fill at all. The screens and hoses are clean. The water inlet valve has been tested and is okay, however there is no power getting to it. The machine will wash spin and drain as long as it is filled manually.

    Any suggestions?

  2. #2

    Default

    Hi,

    No mention of a model#, approx age...but....some Maytag washers have a fuse built into the lid switch assy. If one of the lid switches sticks or fails the fuse will blow and stop the fills from working. The lid switch ( power off first ) is in the consol area.



    http://www.pcappliancerepair.com/cgi...1682&brand=MAC
    Lid switch parts help if needed.

    jeff.
    Appliance Repair Aid
    www.applianceaid.com
    JRAppliance
    www.jrappliance.ca

  3. #3

    Default

    A copy from my e-mail.....

    >Hi and thanks for the help
    >
    >The model # is Maytag lat9804aae approx 1994 or so. the washer will spin wash and drain. the lid switch seems to work because it does activate the cycles. Do you still think it could be the fuse? I did test the water inlet valve and it is good. Why no power to it tho? The fuse? Thanks Jeff JOhn Samoyedny
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Hi,

    Yes the lid switch fuse could still be bad. Push buttons on the consol, make sure one is selected because if the buttons are flush the filling will stop. Bad water temp switch is possibl, timer contact....both cna be ohmed as per the wirign diagram that comes with the washer.

    **the washer will spin wash and drain**

    The washer agitates/washes with no water inside?? If yes, the water level control could be stuck in the full position.

    jeff.
    Appliance Repair Aid
    www.applianceaid.com
    JRAppliance
    www.jrappliance.ca

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. maytag washer , only works on hot water - no cold
    By dkerr in forum Appliance Repair
    Replies: 16
    Last Post: December 30th, 2012, 04:20 PM
  2. Maytag LA412 keeps popping circuit breaker...
    By Adam Baker in forum Appliance Repair
    Replies: 7
    Last Post: November 9th, 2005, 11:52 PM
  3. GE washer will not fill with water
    By Engineer-J in forum Appliance Repair
    Replies: 3
    Last Post: May 1st, 2005, 01:01 PM
  4. Maytag washer - dead
    By dkerr in forum Appliance Repair
    Replies: 4
    Last Post: January 19th, 2005, 07:42 AM
  5. Experiences with Maytag neptune Stack set repair
    By rgmvmm in forum Appliance Repair
    Replies: 3
    Last Post: December 4th, 2004, 08:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •