dcsimg
Results 1 to 4 of 4

Thread: GE GSS25XSRD Water and ice dispenser problem

  1. #1

    Default GE GSS25XSRD Water and ice dispenser problem

    Hi All,

    My GE GSS25XSRD water and ice dispenser are stop working. All light indicators are off and nothing happen when I push my glass in. It seem there is no power at all, but the ice maker still works. The fridge and freezer are working well.
    What is the problem and how can I fix it? Please help.

    Please n thank you,
    Geninq

  2. #2

    Default

    Hi,

    GSS25XSRD
    I found GSS25XSRDSS.

    It seem there is no power at all, but the ice maker still works
    The icemaker and dispensor are two seperate systems.

    All light indicators are off and nothing happen when I push my glass in. It seem there is no power at all
    Bad door switch ( switch must sense the door is closed or the whole dispensor is made inoperable ), broken/loose wire for the dispensor ( at the top hinge ), bad board inside the dispensor.

    If needed:


    Light switch, 3 terminal


    Interface disp asm bk

    -I'd- check the door switch first.

    jeff.
    Appliance Repair Aid
    www.applianceaid.com
    JRAppliance
    www.jrappliance.ca

  3. #3

    Default

    Hi Jeff,

    Thanks for your prompt reply.

    Yes that is exactly my model number.

    How do I know if my door/light switch is broken? If I am not mistakenly remember, before it was broken, when I open the door, the dispenser stop working but the light indicator is on (water, crush or ice cube, either one).

    Could you please show me the cable part at the top hinge? how do I know if this thing is broken? what should I do if this one is damage or bad? any replacement for this item?

    Please and thank you,
    Geninq

  4. #4

    Default

    How do I know if my door/light switch is broken?
    Can be ohmed with an ohm meter.
    http://www.applianceaid.com/electric...ting_tips.html

    It will have a common terminal, one goes to the light, other goes to the dispensor.

    If I am not mistakenly remember, before it was broken, when I open the door, the dispenser stop working
    Correct, both ice and water stop if the switch is bad, or if door is not closing on the switch correctly.

    Could you please show me the cable part at the top hinge?
    Nope, parts breakdowns don't show it.....hinge cover can be removed to expose the wires.

    Dispensor board are bad for getting a burnt spot, can remove ( power off ) and inspect.
    http://www.applianceaid.com/gethroughdoor.html ( second from the bottom )

    jeff.
    Appliance Repair Aid
    www.applianceaid.com
    JRAppliance
    www.jrappliance.ca

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •