*JeffK
December 10th, 2003, 10:55 AM
#426: Subpanel Wiring Author: JeffK, Location: Wisconsin Posted: 04 Dec 2003 07:27 am
----
I'm finally wiring my 100amp subpanels with the isolated nuetrals and grounds but I'm unsure how to seperate these in my panel. It's a 100amp SquareD QO panel as shown in the picture. The metal bar looks like it connects all the screw strips togother. I didn't see anything in the instructions for the panel. Any Ideas?
Thanks for the help
http://www.72chevelle.com/qo.jpg
----
See the holes on the left hand side? Those are threaded holes where you have to buy an accessory grounding bar and screw it to the panel in those holes to create your grounding bar. Do not install any big green screw that would bond the neutral bar to the metal casing. Keep that neutral bar set isolated.
Good Luck
Wg
----
I'm finally wiring my 100amp subpanels with the isolated nuetrals and grounds but I'm unsure how to seperate these in my panel. It's a 100amp SquareD QO panel as shown in the picture. The metal bar looks like it connects all the screw strips togother. I didn't see anything in the instructions for the panel. Any Ideas?
Thanks for the help
http://www.72chevelle.com/qo.jpg
----
See the holes on the left hand side? Those are threaded holes where you have to buy an accessory grounding bar and screw it to the panel in those holes to create your grounding bar. Do not install any big green screw that would bond the neutral bar to the metal casing. Keep that neutral bar set isolated.
Good Luck
Wg
