Pdog
April 10th, 2003, 06:44 PM
I am replacing an old Honeywell RA832A relay with a new R8845U. It is a pretty straight forward switch for a DIY like me except for 2 things.
1. The directions have a chart (it is also on the web) that shows what number on the old relay needs to be connected on the new. It says that the #4 on the old goes to the letter B screw on the new. I can't find the B screw! Am I blind?
2. It also has a comment box stating a jumper from L1 to COM and A in R8845U. Do I use a regular 14 gauge wire and connect a jumper from one to the other to the other?
Unfortunetly, I had the entire new on installed and wired until I got to the #4 screw and couldn't find the B screw. Any help would be appreciated.
1. The directions have a chart (it is also on the web) that shows what number on the old relay needs to be connected on the new. It says that the #4 on the old goes to the letter B screw on the new. I can't find the B screw! Am I blind?
2. It also has a comment box stating a jumper from L1 to COM and A in R8845U. Do I use a regular 14 gauge wire and connect a jumper from one to the other to the other?
Unfortunetly, I had the entire new on installed and wired until I got to the #4 screw and couldn't find the B screw. Any help would be appreciated.
