DSC 1832 Motion Sensor issue

[A.n.d.r.e.w]

Having issues getting motion sensors to by-pass in Stay mode. They are set to Zone attribute 05 but still set the alarm off. I hardwired them in closed loop no ressistor. Any ideas?????

[george6488]

If you arm the system in STAY (hold the stay button on keypad for 2 seconds) mode and open a door that is set for delay....the panel then thinks you left and arms in away mode.

Do not open any exterior doors until the normal exit delay has expired.

Post back if you need more help

[A.n.d.r.e.w]

Setting the alarm in Stay mode is no problem. The system for some reason won't set the motions on by pass. It shows Stay mode when I set it and the acknowledges that there is a by-pass warning but the alarm is still tripped by the sensors. ? It is as if the system doesn't recognize the sensors as zone attribute 05.

[Mattyp]

Setting the alarm in Stay mode is no problem. The system for some reason won't set the motions on by pass. It shows Stay mode when I set it and the acknowledges that there is a by-pass warning but the alarm is still tripped by the sensors. ? It is as if the system doesn't recognize the sensors as zone attribute 05.

Maybe try to take the power awy and reset the device.