Lakeman
January 3rd, 2009, 08:46 PM
I have recently installed a DSC 1832 system with 4 zones (all hard wired). The system is connected to a central office monitoring system, the entry delay is 30 sec.
Having purchased from Home Security store, they helped me program it after I installed it. Using their sheet of instructions, it all went pretty much to plan.
The system was working fine for a few weeks, then the monitoring company called me and said the system lost ac power. Upon investigation I found the 120AC adapter had been hit and fell off the wall destroying it. I replaced it and gave the battery 4-5 hrs to charge back.
Problem: The keypad 5500 is displaying a yellow traingle light and the green check mark with a beep every 10 sec or so.
I tried a reset *2 ## displayed digit 4 Pushed # then display returned to above description. The system can be armed/disarmed in a normal manner.
Does anyone have a suggestion as to what I might try to reset the system?
Thanks,
Rusty
Having purchased from Home Security store, they helped me program it after I installed it. Using their sheet of instructions, it all went pretty much to plan.
The system was working fine for a few weeks, then the monitoring company called me and said the system lost ac power. Upon investigation I found the 120AC adapter had been hit and fell off the wall destroying it. I replaced it and gave the battery 4-5 hrs to charge back.
Problem: The keypad 5500 is displaying a yellow traingle light and the green check mark with a beep every 10 sec or so.
I tried a reset *2 ## displayed digit 4 Pushed # then display returned to above description. The system can be armed/disarmed in a normal manner.
Does anyone have a suggestion as to what I might try to reset the system?
Thanks,
Rusty
