View Full Version : GE XL44 Electrode is bad
October 11th, 2008, 11:50 AM
Hello - I have a GE XL44 JGBP30WEA4WW. One of the electrodes is not sparking. I need to know how to replace the electrode and where I can buy a new electrode. :dontknow:
October 11th, 2008, 07:05 PM
The cooktop must come of to acess the electrode. Has a push clip to hold the electrode to bracket and the wire just pulles off.
Spark electrode, top burner (http://www.repairclinic.com/referral.asp?R=153&N=244911)
Parts breakdown is here, should help with disassembly (http://www.searspartsdirect.com/partsdirect/retrieveModelActionHome!retrieve.action?pop=true&modelNumber=JGBP30WEA4WW&pop=flush)
October 13th, 2008, 10:49 AM
Thanks, does the cooktop flip up? It seemed pretty tight when I was jacking around with it. Do you think maybe I have to access it from the underside? Where the Broiler burner is?
Thank you very much
October 13th, 2008, 04:35 PM
does the cooktop flip up?
Once the grates, burners, screws are removed and the 2 puch clips between the cooktop and manifold cover at the front are pressed in....then the top will hinge/lift up.
Do you think maybe I have to access it from the underside? Where the Broiler burner is?
October 16th, 2008, 12:27 AM
Excellent, Thank you, Jeff :rock:
October 16th, 2008, 09:12 AM
If you get a chance, let us know how the repair goes :)
October 26th, 2008, 12:45 PM
Replacing the electrode didn't work... :bawling:
Seems no juice is coming from the wire to the electrode... I think I'll need to call somebody out...
October 26th, 2008, 07:52 PM
Seems no juice is coming from the wire to the electrode
Open wire, knicked/cut/pinched between the spark module and the electrode.
If no, possible bad spark module.
Try switching one of the output wires on the spark module to see if the problem moves to another burner.
Powered by vBulletin® Version 4.2.2 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.