scuba_dave
June 26th, 2008, 08:24 PM
I've seen these as fans, premade
I also saw one setup in Florida at a Hotel, pool deck
Just feed line, copper I think, with spray nozzles that delivered a fine mist.
Any ideas on the nozzles, fittings for a DIY?
Cold weather so it would have to be "easily" drained
I'm thinking gravity would do most of the job, then have the far end with a valve/spigot that opens
http://www.air-n-water.com/photos/3101-5b.jpg
I also saw one setup in Florida at a Hotel, pool deck
Just feed line, copper I think, with spray nozzles that delivered a fine mist.
Any ideas on the nozzles, fittings for a DIY?
Cold weather so it would have to be "easily" drained
I'm thinking gravity would do most of the job, then have the far end with a valve/spigot that opens
http://www.air-n-water.com/photos/3101-5b.jpg
