Ademco Vista 15 Master Code

[firefight43]

Just brought a house and it has an Ademco Vista 15 system in it with the basic two line fixed keypad. The owner gave me a code which I believe is the Master code but I want to change it. Everything in with the system works fine but am having a problem getting into programing mode. I have the installer manual and I followed the directions with powering up and hitting *+# but it didn't same to work. I also tried using the basic installer code 4112 + 800 but that didn't work either. Anybody have any ideas what I should do or try. Thanks!

[george]

Go to www.homesecuritystore.com

Look for the manuals box at top of page right under the word "unbeatable".

You can download the manuals you need....you will have to contact the HSS people for the user ID and password.

E-mail contact = slow response

Phone contact = fast response

If you do not have the codes for your system......you will have to default it to factory specifications. The procedure is in the installation manual:lollypop: