DSC Power632 Problem

[lostcode]

Hello Evryone,

I bought a home that included a Power632 system, it has not being monitoring.
About 3 weeks ago the system began beeping off and on. I called DSC and explained the situation. I was told to replace the battery and to call back for re-installing instructions.
Taking it on my own hands I disconnected the battery and turned off the electrical switch for the keypad, then when I changed the battery I did it in the reverse order, however!, I must have pressed one of the wrong keys by mistake (such as the away or stay) and the system got armed.
I tried contacting the original owner but he does not remember the master code.

Any help to reset the system will be greatly appreciated.

[lostcode]

Got the reset code figured out (by disconecting a zon and shorting out a couple of conectors. no help fro m the forum, but I am thankful to have visited this place. I will to contribuite whenever Ican.

Thanks for the opportunity

[george]

The master code is only used for user functions such as new user codes, date, time, etc. Many default master codes are set to 1-2-3-4

The installer code is used for any reprogramming of the system functions.

The master code can be used to arm / disarm the system. The installer code cannot be used to arm / disarm the system.

System reset is something that is done when all codes are unknown and resets the system to factory default...if it has not been "locked" by a previous installer. A reset system has no custom programming completed.

Is your alarm working?????????

[RachLuvJun]

Can you share how you figured out how to reset the code? I have the same alarm system in my new home. since it was bank owned no one had the code. I'd like to use it without monitoring. I am clueless when it comes to these things. right now I ahve the circuit off to it so it won't keep going off. I'd love some help.

[fxdr]

I have a PC1555RKZ LED keypad working on my business, one week ago one of my employees made some mistake when disarming the system and from that time my system is continuos beeping when one of the motion sensor is activated (of course while the system is disarmed).

[george6488]

Turn off the keypad "chime" feature. Refer to the manual for instructions