PDA

View Full Version : Vent question


GordonAnderson
January 2nd, 2007, 11:55 PM
Hello,

We are remodeling a 55 year old house and I have a vent question. The drain system has all been replaced with ABS some time a go. My question is about the tub and washer vents. Both the tub and washer have P traps and a very short, 18” or so, run to the 3” main drain. These drains do not have a vent. They enter the main drain down stream of the toilet a few inches. Just up stream of the toilet is the 3” main vent. Is this acceptable or do I need to add a vent to the tub and washer? If I add a vent to the tub and washer can I connect it to the main soil vent?

Thanks!

--Gordon

BOA
January 4th, 2007, 11:15 AM
Your bath tub should have a built in vent. The round plate just below the spout on the tub. Some have a lever for the drain, some don't. It is put in place by a screw or two.

I'm not sure about the washer, sorry.

mrikking
January 10th, 2007, 04:41 PM
Thats right for the tub.